“AMG Mountain Ash” Tesla Cybertruck 2024 PreCut Wrap Kit PPF
“AMG Mountain Ash” Tesla Cybertruck 2024 PreCut Wrap Kit PPF
The product is a pre-cut paint protection film kit designed for the Tesla Cybertruck 2024. It covers the entire car and is made of polyurethane material that is UV-resistant and washable. The film is computer cut and easy to install. The kit covers all of the stainless panels on the Cybertruck.
Now we are including an extra Frunk/Hood piece at no extra cost to you! Start with this piece and perfect your technique. If you mess up, don’t worry about it, there is an extra one on the roll! Just one more way we make sure you have the confidence to wrap your Cybertruck yourself!
Function
-Protect the original paint from scratches.
-Water-resistant, easy to be cleaned with water and soap.
-Removable, will not harm the car paint.
Installation
### Installation Instructions for a Pre-Cut DIY PPF Kit for Tesla Cybertruck
**Materials Needed:**
- Pre-cut PPF kit (Paint Protection Film)
- Microfiber towels
- Squeegee or application tool
- Spray bottle with a mixture of water and a few drops of dish soap (for lubrication)
- Heat gun or hairdryer
- Isopropyl alcohol or automotive cleaner
- Clean, lint-free cloths
- Optional: Plastic trim removal tools
**Preparation:**
1. **Clean the Vehicle:**
- Wash your Tesla Cybertruck thoroughly with car soap and water.
- Ensure the surface is free of dirt, dust, and any other contaminants.
- Dry the vehicle completely with a clean microfiber towel.
2. **Clean the Installation Area:**
- Wipe down the specific area where you will be applying the PPF with isopropyl alcohol or automotive cleaner.
- This will ensure no residues or oils interfere with the film's adhesion.
**Application:**
1. **Position the Pre-Cut Film:**
- Unroll the pre-cut PPF pieces on a clean, flat surface.
- Identify each piece based on the installation instructions that came with your kit. Typically, the pieces are labeled for specific areas of the vehicle.
2. **Apply the Film to the Vehicle:**
- **Spray the Surface:**
- Lightly spray the area of the vehicle where you will be applying the film with the soapy water mixture. This will help you reposition the film if necessary.
- **Peel and Position the Film:**
- Gently peel the backing off the pre-cut PPF piece, taking care not to let the adhesive side touch anything.
- Carefully place the film onto the vehicle surface. Align it according to the edges of the area it’s meant to cover.
3. **Squeegee the Film:**
- Use a squeegee or application tool to gently press the film onto the vehicle. Start from the center and work your way outwards to remove any air bubbles and excess water.
- Be gentle to avoid stretching or damaging the film.
4. **Heat and Shape the Film:**
- Use a heat gun or hairdryer to apply mild heat to the film. This will make the film more pliable and help it conform to the vehicle’s curves and edges.
- Gently stretch and mold the film as needed to fit the contours of the vehicle. Avoid overheating, as it can cause damage to the film.
5. **Trim and Final Adjustments:**
- Use a sharp blade or utility knife to trim any excess film along the edges for a precise fit. Be careful not to scratch the vehicle’s paint.
- Smooth out any remaining bubbles or wrinkles with the squeegee.
6. **Final Cleaning:**
- Wipe down the edges and surrounding areas with a clean microfiber cloth to remove any soapy residue and ensure a clean finish.
**Post-Installation Care:**
1. **Allow the Film to Set:**
- Let the PPF set for at least 24 hours without exposure to water or harsh conditions. This allows the adhesive to fully bond with the vehicle’s surface.
2. **Avoid Washing the Vehicle:**
- Do not wash the vehicle for at least 48 hours after installation. This prevents the film from being disturbed during the curing process.
3. **Regular Maintenance:**
- Clean the PPF with a mild car soap and water solution. Avoid abrasive cleaners or tools that might damage the film.
- Regularly check the edges of the film to ensure they are secure and free of debris.
**Tips:**
- **Work in a Clean Environment:**
Ensure that you are working in a dust-free environment to avoid debris getting trapped under the film.
- **Be Patient:**
Take your time with each step, especially during the alignment and squeegeeing process.
- **Seek Assistance:**
If you find it challenging to apply the film on your own, consider enlisting the help of a friend or a professional installer.
By following these detailed instructions, you should be able to successfully apply your pre-cut PPF kit to your Tesla Cybertruck and protect it from damage.